Ардуиното е закупено от Англия, комплектът включва:
Official Arduino UNO Rev3 2012 board Made in Italy
Compatible USB cable
MCU: ATmega328
USB interface: ATmega16U2
Operating voltage: 5V
Digital I/O pins: 14 (including 6 with PWM capability)
Analog input pins: 6
I/O pin output current: 40mA max
3.3V output current: 150mA max
Flash memory: 32 kB (0.5kB used by bootloader - included)
Static RAM (SRAM): 2 kB
EEPROM: 1 kB
Clock speed: 16MHz
Revised Contents Now Include:
Larger 830 tie-point Prototype Board (with dual power rails on each side)
Prototyping Male-Male jumper Wires:
20cm x 4
16cm x 4
12cm x 8
8cm x 49
25 x Resistors:
100R x 5
220R x 5
330R x5
1K x 5
10K x 5
15 x Diffuse 3mm LEDs:
Red x 5
Green x 5
Yellow x 5
General Purpose Diode: 1N4148
Mini push-button switches x 5
Miniature speaker
9V Battery lead to provide power on the move (complete with connector to plug directly into Arduino)
16X2 LCD Module with blue backlight (16-pin header provided to enable direct plugging into breadboard)
10K potentiometer for setting contrast on LCD Module
HC-SR04 Ultrasonic distance measuring module
Ultrasonic rangefinder code as used in photo below: UltraSonic Rangefinder
This is all you need for the example projects:
RangeFinder (see the sketch running below)
HelloWorld
LCD Scrolling
LCD Cursor blink
Blink
Fade
Digital Read Serial
Analog Read Serial
BlinkWithoutDelay
Debounce
StateChangeDetection
ToneKeyboard
ToneMelody
and many more...
Комплекта е чисто нов, неизползван! За връзка: 0899228489, цена 89лв
